Ascension Island is a volcanic island located in the middle of the South Atlantic Ocean, south of the equator.
The island is home to an airport with an aviation fuel depot. The existing additive equipment was at the end of its useful life and needed to be completely replaced.
The task was to manufacture equipment for the injection of AL41 de-icing inhibitor and AL61 fuel lubricant additive.
The delivery included measuring the levels in the additive tanks and a simple roof to protect the technology.
The lifetime of the equipment is for a minimum of 10 years and up to 20 years with proper maintenance.
Evaluation of existing situation, design, production, installation and putting in service of new metering lines to fit into existing site layout. Including automatic loading control by flow computers and terminal administration system TAMAS.
Instalation of control system TAMAS V0 + Info Panels for truck loading queue traffic management for SGEPP Gabon Libreville
Engineering, Manufacturing, Commissioning of Custody Transfer Metering Station for railway/truck unloading of fuels at Nsam terminal in capital city of Cameroon
Delivery and Commissioning of Truck Loading Grounding tester for SGEPP Gabon.
Custody Transfer Metering SKIDs for NNPC Nigeria Engineering/Design/Manufacturing/Delivery/Installation/Commisioning of metering SKIDs up to 24" on crude oil/products pipelines on the pipelines network in Nigeria.
Unloading/Loading SKID for NATO airbase at Liwatom Estonia.
Technology for Bangladesh DHAKA airport new fuel terminal Delivery of loading/unloading SKIDs, SCADA & Leak Detection System & ESD for pipeline, Pump Station, Valves etc.
Modernisation of Filters / water separators for aviation fuels and installation of tanks edge protection on 9 fuel storage tanks for improvement of staff safety at UK base at Falklands.
Modifications of pipelines in front of and on the loading terminal. Installation of a new metering SKID approved for custody transfer. Extension of additive pipes with electric heating and insulation. Installation of a new EVAPlus and AccuPlus additive unit with five inputs. Installation of a new loading arm for the bottom filling of tank trucks and vapour extraction. Modifications of the control system.
DMSP (Depo Monitoring System Project) centralise all technology data from all depots and in HQ there is full control of actual inventories in Sudan. DMSP project includes also completely new HW like dual redundant SCADA servers, workstations, large screen monitors, communication converters, SW licences and mobile devices.
Diesel handling system for fueling of fire water pumps and commisioning of the fire fighting system.
EPC construction of new terminal with 16 arms at 4 loading places for all kinds of fuel with biofuels blending and additive dosing. Project included as well new manifold, piping, extension of control system TAMAS, CCTV, switch room, cabling, security system, fire detection. New fire fighting system with new fire water tank 500 m3 .
EPC delivery of new technology, control and administration system for loading of fuels (gasoiline, diesel, kerosene, JET-A1) to tanktrucks and railcars and unloading of the product from tanktruck and railcars. The first phase includes design and delivery of the metering equipment.
EPC project - design, production, delivery and start-up of container - based unit for dosing of additive (drag reducing agent) into high pressure product pipelines. Including integration to existing pipeline control system.
EPC construction of vapour recovery unit (VRU). Installation of VRU with capacity 380 Nm3 /h to fulfill emission limit 150 mg/Nm3 . Demolition of existing VRU, partial rehabilitation of piping system, delivery and installation new vapour low profile arm for unloading of railcars. Complete ground and construction works, electrical installations, lightning protection and grounding, illumination and field instrumentation.
EPC construction of additivation technology for diesel and gasoline on the loading rack for tank truck filling. Underground tank with double wall, total capacity 100 m3 in 10 sections. Construction of new pumping station for unloading and delivery of additives, stainless steel piping with electrical heating and insulation. Installation of 5 new additive injectors AccuPlus including EVA Plus, each with 5 inlets, new loading place for bottom loading.
Vaclav Havel International Airport Prague is the biggest airport in Czech Republic with more than 15 million passengers per year. In this project was built completely new facility for tanktrucks for delivery of JET-A1 fuel to aircrafts. Our scope included technology for JET-A1 loading to tanktrucks (metering runs - SKIDs with flow computers Accuload IV incl. metrology approval according to MID, new control system, cabling and field instruments and additive dosing (conductivity improver) at terminal inlet. The scope included also complete design documentation.
Construction of storage tank with volume 5000 m3 for aviation fuel JET-A1. The works included also new related piping, field instruments, extension of control system, CCTV, fire detection and fire fighting EPS, security system, fencing, new tank for fire water, oily water separator, demolish of old fire water tank and diesel handling storage technology.
Design and delivery of technology for JET-A1 fuel delivery to the airport tank trucks and technology for additive dosing (conductivity improver) at JET-A1 fuel terminal inlet.
Design, fabrication, commissioning of skids for delivery of fuel (diesel) to ships. The skids are certified according to MID and enable fast bunkering of marine ships.
Design, production, start-up of mobile units for dosing of additive - drag reducing agent into high pressure product pipeline.
Construction of a warehouse for operating fluids and piping into the assembly hall of the new Jaguar Land Rover production plant. The scope included construction of a liquid storage facility with 9 tanks for products and 1 tank for slop. The stored and pumped substances are: petrol, diesel arctic, diesel summer, brake fluid, screen wash, refrigerant R134A, AD BLUE, antifreeze, refrigerant R1234YF.
Design documentation of technology and control system for top unloading of JET-A1 from railcars for newly constructed airport Chengdu Tianfu.
This project included design, delivery, commissioning and metrological certification of metering skids for FAME with maxiumum capacity of 45 m3 /h. The skids were installed in different MOL terminals.
The scope included design, delivery, commissioning and metrological certification of metering lines for unloading and loading of trucks and for unloading of ships, bio-blending equipment, valves and other accessories, additive dosing system, grounding monitors, bottom loading arms and level gauging system.
Engineering, production, delivery and start-up of technology for measuring of light products including JET-A1 loaded to tanktrucks and railcars. Metering lines in a form of skids, independent density measurement, additive dosing and colouring system, loading arms. System for automation and administration of the terminal - TAMAS.
Based on previously executed design, production, delivery and start-up of technology for tanktrucks loading and complete low-voltage part, including control and administration system TAMAS.
Upgrade of solar power system at Fula to Khartoum heavy crude export pipeline. The scope included delivery and configuration of units (RTUs) for control of accumulator charging from solar panels.
Modernisation of technology for storace of liquid fuels, unloading from railcars and loading to tanktrucks including biofuels blending.
Engineering, production, delivery and start-up of technology for measuring of light and heavy products loaded to tanktrucks. Metering lines in a form of skids, independent density measurement, extension of additive dosing system, tanktrucks weight scales, loading arms. System for automation and administration of the terminal - TAMAS.
Design, production, delivery and start-up of high capacity flow metering skids, tank gauging system, control system (PLC, ESD, SCADA, TAMAS), fire detection and control of firefighting system.
Modernization of flow measuring system according to MID requirements, equipment for biofuels blending, additive dosing system, automation and dispatching system.
Delivery of SCADA system for monitoring of 2 product pipelines with total legth over 1500 km including 12 pumping stations, 10 block valve stations and 3 cathodic protection stations.
The contract for NSPA: Construction of new terminal JET-A1 with 2 vertical storage tanks, one place for tank trucks unloading, two SKIDS for tank trucks loading, additivation system, instrumentation, control and administration system TAMAS.
Design, delivery and start-up of technology and control system for tanktruck loading measurement in the extended part of the terminal. As well as existing part, also the new equipment was delivered in form of skid and approved according to MID.
Delivery and start-up of additive dosing system for tanktruck loading terminal for 9 loading lines. Complete additive dosing technology system: unloading, storage, delivery, system integration.
Detail Design Documentation Package for newly built Petrochina terminal in Dongguan. Includes technology for tanktruck loading and control system for the entire tankfarm with planned capacity 400.000 m3 . Dongguan is first Chinese terminal designed according to European conventions.
Design, fabrication and start-up assistance for ten pieces measuring SKIDs and loading arms for loading tank truck, custody transfer of different products. Seven pieces for light products a three pieces for heavy products with heating and insulation.
Fabrication of 400 m3 /h vapor recovery unit (cleaning of gasoline vapors) for marine loading terminal Livorno, EPC Jordan Technologies.
Metering skids for Port Sudan storage depot for Loading/Unloading liquid products. Skids with size upto 16" are designated for custody transfer.
The contract for NATO: reconstruction of the airport in Sliač. The construction of new loading from rail tankers including 2 km long pipeline to the reservoirs (3x250m3 ) and output into tank trucks.
Prague Airport - measurement of density and pressure. Delivery of MicroMotions for measuring of density in the tank of fuel. Delivery of pressure gauges.
Delivery of technology for storage, loading and unloading of products at the Airport of Pardubice, CZ. Delivery of automated control system and instrumentation - switchboard, field instrumentation and TAMAS system. Funded by the EU.
Ostrava Airport - reconstruction of facilities. New wiring - cables, excavations - 22kV and 6kV for the airport area. Public lighting, gas connection. New (building + technology) high voltage substation HTS-2. New high voltage 22 and 6kV switchgear in three substations, new high voltage transformer, reconstruction of low voltage in substations.
Reconstruction of storage: Installation of two tanks (250 m3 ), installation of metering skids, build of new loading and unloading islands.
Design, production and recovery of 16 measuring skids and the system TAMAS for AC terminal. Skids based on volumetric measurement (PRIMA4) ACL. Colouring of the product by using devices EVA6. TAMAS system for unloading.
Extensive modernization of fuel storage at two locations - Vrbice I and Vrbice II, it affects about 20 objects; realisation: 2010-2012. Construction work and new automated control system for the new technology, a new system of measurement and control + camera security system.
Construction of warehouse storage capacity, supply of instrumentation for a new unit No 237.
Railway terminal: Design, production and recovery of 11 measuring skids, TAMAS system for railway terminal (loading and unloading), mass measurement by Micromotions, Acculoads, integration to the LNHB system.
Following the delivery of METROSTAV: full supply for low voltage switchgear for unit PS 262 - construction electrical part. Delivery of the 10-fields switchboard.
Delivery of 6 SKIDs for rail terminal, switchboard for automated control system and instrumentation. Software:TAMAS system. There were needed major adjustments for dispensing into rail tankers. Product is a fuel extracted from shale.
Four old flowmeters were replaced by SMITH PRIME devices.
Additivation systems for dispensing into tank trucks at the terminal in INA Rijeka and Solin. The first use of the new blending unit Accuplus - 15pcs.
Design and fabrication of filtration, measuring and regulating skids based on mass measurements at the beginning and at the end of the pipeline from the company STAROIL. Our first application of crude oil. Development and production of stationary Corioli Prover. The first use of the crude oil analyzer and auto sampler.
Delivery of 26 measuring skids with Micromotion for the refinery in Erbil / Kurdistan. Corioli prover with triple mass flow measurement, FloBoss control.
Technology and control system for custody transfer measurement of unloading and loading and additive dosing of fuels on tax-free tankfarm.
Delivery and integration of vapour recovery unit with 150 m3 /h capacity.
Delivery of complete truck loading installation with 4 loading islands, 16 metering systems for light fuels, top and bottom loading, additive dosing system for Lukoil and Shell additives, blending of biofuels and coloring of diesel fuels. Installation is completely automated by TAMAS control system.
Delivery of containerized coloring system, system for measuring of loaded and unloaded products, and TAMAS supervising system.
Fabrication of 300 m3/h vapor recovery unit for truck loading terminal Bratislava, EPC Jordan Technologies.
Fabrication of 300 m3 /h vapor recovery unit for truck loading terminal Komárom, EPC Jordan Technologies.
Engineering, fabrication, installation supervision and start-up of metering skids and control system. The facility is owned by Neste Oil, a Finnish oil refining and marketing company.
Delivery of metering skids, grounding equipment and TAMAS control system for truck loading terminal for gasoline and shell oil products. At the moment, the project is extended by railway terminal.
Skids 12" class 900 and 16" class 600 for filtration, pressure control and flow metering of diesel and gasoline in redundand design. Including intargation into existing SCADA system.
Engineering, fabrication, installation and start-up of 400 m3 /h vapour recovery unit for Zhishan tankfarm.
Engineering, fabrication, installation and start-up of 400 m3/h vapour recovery unit for Yiwan - Shenzhen tankfarm.
2010-2011: Fabrication of 9 pcs of mini compact vapor recovery unit installed on gas stations, EPC Jordan Technologies.
Fabrication of 150 m3 /h vapor recovery unit for truck loading terminal Kaunas, EPC Jordan.
EPC delivery of loading facility for liquid chemicals to river rankers through loading arms DN200. Laoding arms are hydraulically actuated and equipped by ERS (Emergency Rrelease System).
Technology and control system for custody transfer measurement of unloading and loading and additive dosing of fuels on tax-free tankfarm. EPC contract.
Integration of new tank gauging instruments into existing control system.
Design, delivery installation of technology, electrical power supply and control system for pipeline pumping station Klobouky.
Complex supply of the engineering, technology and automation for railway transloading terminal for flamable products liquids.
Delivery of 8 grounding testers for tank truck loading.
Modernisation of technology for tank truck loading and installation of new automation system (EPC delivery).
Delivery, fabrication, assembly and commissioning of complex technology part of tankfarm and tanktruck terminal including auxiliary operations.
Design, fabrication and start-up assistance. Measuring and control of amount of products when loaded into ships. There are 14 metering skids for custody transfer of different oil products. The skids have been installed in the sea terminal in the Turkmenbashi complex for measuring and control of amount of products when loaded into ships.
BASIC DESIGN for 4 strategic fuel storages and terminals of the State fuel reserves of Bulgaria.
Modification of tank truck loading terminal for loading of H-LBI (white spirit).
Delivery of electrical equipment for the fuel storage tanks.
Delivery of additivation system EVA5 for truck fillings.
Complex modernisation of the control system on tankfarms (EPC delivery).
Delivery of the trucks fuel loading technology including additives and biofuel blending.
Delivery of blending unit EVA 6, SKID service and bottom loading trucks technology.
Design, engineering, delivery of additive dosing system. The referenced facility is located in Pudong airport, one of the biggest airports in the world. The fuel storage has been equipped with dosing system to manage increasing conductivity of Jet fuel. It is used for injection of additive agent into the product when unloaded from ships to the fuel storage at the airport. The EPC delivery included additive container with pumping skid and connection to current installation.
Refurbishment of fuel tanks and related work.
A recuperation unit deployment.
Basic and Detail Design, engineering, EPC delivery on turn-key basis. The terminal has 4 loading bays for TOP and BOTTOM loading with capacity of 60 tank trucks loading per day.
Expansion of tankfarm and tank truck loading terminal for biofuels blending. EPC delivery.
Delivery of automation control system and construction of storage tanks in Roudnice.
TAMAS and SCADA SCX control systems for the fuel terminal.
Fuel loading terminal refurbishing for Čepro.
Expansion of 11 tankfarms and tank truck loading terminals for biofuels blending. EPC delivery.
Delivery of additive dosing units
Vapour recovery and Additive dosing.
Instrumantation and control system for ethylene glycol unloading from ships.
TAMAS and SCADA SCX control systems for the fuel terminal.
Implementation of automation system for the Roudnice fuel storage.
Construction of new tankfarm for petroleum products with capacity 100 000m3 (EPC delivery)
Design, delivery and engineering of additive dosing system EVA6, additive pump station and loading arms on taktruck terminal.
Conceptual design for the fuel warehouse re-construction in Varna
TAMAS and SCADA SCX control systems for the fuel terminal.
Fuel dispensing terminal, including painting and additive feeding technologies. Major delivery.
Delivery of additive dosing units.
Delivery of an earthing equipment for a Client in Qatar
Complex delivery of warehouse and filling tray technology for a fuel terminal (railway loading station, tanks, filling trays, additive feeding technologies).
Delivery of additive dosing system EVA5 for jet fuel for military purposes.
Delivery of additive dosing system EVA5.
Project and delivery of MaR (Measurement and Regulation) for two new oil tanks.
Dispensing terminal at an army airport, Pristina.
Project and delivery of a light fuel additive feeding unit.
Control, technology, fuel dispensing unit.
Reconstruction of a fuel warehouse and dispensing station.
Complete warehouse reconstruction.
TAMAS® and automation system SCADA SCX for fuel terminal.
Delivery of MaR (Measurement and Regulation) and computer-assisted control system for a construction of new fuel terminal tanks.
Light fuel oil and oil filling into railway tanks including feeding of additives.
Project, complex delivery of technology and control of a river fuel warehouse on the Danube with loading into railway wagon tanks and truck tanks.
Delivery of facilities, technology, MaR (Measurement and Regulation) and computer-assisted control system of fuel terminal.
Delivery of facilities, technology, MaR (Measurement and Regulation) and computer-assisted control system of a fuel terminal.
Engineering, project and delivery of fuel terminal technology at a locomotive depot.
Engineering, project and delivery of a fuel terminal technology and control.
Project, complete delivery of warehouse technology and control.
Engineering, project and delivery of wiring, MaR (Measurement and Regulation) and computer-assisted control system of fuel terminal.
Delivery of project, wiring, MaR (Measurement and Regulation) and computer-assisted control system of a recovery unit and fuel product line terminal.
Engineering, project and delivery of a fuel warehouse reconstruction (oil management).
Delivery of complex technology and control of light fuel terminal.
Delivery of a project, wiring, technology and control of reconstructed and new filling trays of a fuel terminal (railway loading station, tank station, filling trays, vapour return line).
Delivery of recovery, technology and control units for new filling trays.
Project and delivery of electric equipment and computer-assisted control system of a petrol vapor recovery line for PARAMO Pardubice a.s. railway terminal.
Participation in a project involving re-instrumentation of an ethylene unit.
Project and delivery of fuel terminal technology (railway loading station, tank station, filling trays, vapour return line).
Delivery of Wiring, MaR (Measurement and Regulation) and computer-assisted control system of a fuel terminal.
Delivery of Wiring, MaR (Measurement and Regulation) and computer-assisted control system.
Technical supervision over an installation of a SCADA system for a construction of a product line at Kandla-Bhatinda, India.
Engineering, project and delivery of fuel terminal technology (railway loading station, tank station, filling trays, vapor return line) in Prerov.
Delivery and assembly of technology and wiring for 12 fuel filling stations.