Major projects - Europe



BUILDING OF JET FUEL STORAGE IN LIELVARDE AIRFIELD IN LATVIA / 2014 - 2015
The contract for NSPA: Construction of new terminal JET-A1 with 2 vertical storage tanks, one place for unloading tank trucks, two loading SKIDS (islands) for loading tank truck, including additivation system, control system and instrumentation and TAMAS system.
Czech Republic / 2014 - 2015
The supply and installation of two vertical storage tanks (capacity of each 50 m3), pipeline, valves, pump and steel structure.
The construction of three different types of aboveground storage tanks (capacity 1500 m3, 200 m3 and 140 m3) and manufacturing and supply tank 0.4 m3. All tanks completely made of stainless steel. Including complete insulation and sheathing.
Design, delivery and recovery of electrical and automation control of technology at heating plant PGE Kielce.
(This project was implemented by subsidiary AUTEL, a.s.)
Construction of a new warehouse ammonia. New building storage with three cylindrical tanks with a capacity of 95 m3 each, slop tank for unloading rail cisterns, bottom unloading arm, new pipelines, the new control room, ammonia leak detection, sprinkler system, new MaR and control system.
The construction of new reservoir for light fuel oil (capacity 1300m3), including unloading system, pipelines and new system of measurement and control.
Ostravské vodárny a kanalizace (OVAK, Czech Republic) - Upgrade to the SCX 6 for central dispatching of drinking water lines. Licence and software work in connection with the transition to the SCX 6. TSWM/LP stations.
Reconstruction of the wastewater treatment plant (WWTP) in Velke Mezirici, CZ.
Additivation systems for dispensing into tank trucks at the terminal in INA Rijeka and Solin. The first use of the new blending unit Accuplus - 15pcs.
Four old flowmeters were replaced by SMITH PRIME devices.
Delivery of 6 SKIDs for rail terminal, switchboard for automated control system and instrumentation. Software:TAMAS system. There were needed major adjustments for dispensing into rail tankers. Product is a fuel extracted from shale.
Central Wastewater Treatment Plant: next phase of reconstruction - control system for the biological section.
Completely new terminal in Loukov. Building part - new bath, roofing bath, new substation. Technological part - new pumps, piping, low and high pressure valves. Electrical Engineering - new & reconnected drive units . Automation & instrumentation - a new PLC, field instrumentation.
Following the delivery of METROSTAV: full supply for low voltage switchgear for unit PS 262 - construction electrical part. Delivery of the 10-fields switchboard.
Railway terminal: Design, production and recovery of 11 measuring skids, TAMAS system for railway terminal (loading and unloading), mass measurement by Micromotions, Acculoads, integration to the LNHB system.
Construction of warehouse storage capacity, supply of instrumentation for a new unit No 237.
Extensive modernization of fuel storage at two locations - Vrbice I and Vrbice II, it affects about 20 objects; realisation: 2010-2012. Construction work and new automated control system for the new technology, a new system of measurement and control + camera security system.
Design, production and recovery of 16 measuring skids and the system TAMAS for AC terminal. Skids based on volumetric measurement (PRIMA4) ACL. Colouring of the product by using devices EVA6. TAMAS system for unloading.
Reconstruction of storage: Installation of two tanks (250 m3), installation of metering skids, build of new loading and unloading islands.
Ostrava Airport - reconstruction of facilities. New wiring - cables, excavations - 22kV and 6kV for the airport area. Public lighting, gas connection. New (building + technology) high voltage substation HTS-2. New high voltage 22 and 6kV switchgear in three substations, new high voltage transformer, reconstruction of low voltage in substations.
WWTP Michálkovice, the Czech Republic - Upgrade to the SCX 6. Licence and software work in connection with the transition to the SCX 6.
Delivery of technology for storage, loading and unloading of products at the Airport of Pardubice, CZ. Delivery of automated control system and instrumentation - switchboard, field instrumentation and TAMAS system. Funded by the EU.
Prague Airport - measurement of density and pressure. Delivery of MicroMotions for measuring of density in the tank of fuel. Delivery of pressure gauges.
The contract for NATO: reconstruction of the airport in Sliač. The construction of new loading from rail tankers including 2 km long pipeline to the reservoirs (3x250m3) and output into tank trucks.
SVAK - upgrade to the SCX 6. Licence and software work in connection with the transition to the SCX 6 per customer participation.
Reconstruction of water treatment plant in Kroměříž (CZ), upgrade to the SCX 6, licenses, software and editing work in the visualization of the central dispatching of the Waterworks and Sewerage Kroměříž.
Delivery of metering skids, grounding equipment and TAMAS control system for truck loading terminal for gasoline and shell oil products. At the moment, the project is extended by railway terminal.
Engineering, fabrication, installation supervision and start-up of metering skids and control system. The facility is owned by Neste Oil, a Finnish oil refining and marketing company.
Fabrication of 300 m3/h vapor recovery unit for truck loading terminal Komárom, EPC Jordan Technologies.
Fabrication of 300 m3/h vapor recovery unit for truck loading terminal Bratislava, EPC Jordan Technologies.
Delivery of containerized coloring system, system for measuring of loaded and unloaded products, and TAMAS supervising system.
Delivery of complete truck loading installation with 4 loading islands, 16 metering systems for light fuels, top and bottom loading, additive dosing system for Lukoil and Shell additives, blending of biofuels and coloring of diesel fuels. Installation is completely automated by TAMAS control system.
Delivery and integration of vapour recovery unit with 150 m3/h capacity.
VaS Boskovice - Upgrade to the SCX 6. Licence and software work in connection with the transition to the SCX 6.
VaS Žďár nad Sázavou - Upgrade to the SCX 6. Licence and software work in connection with the transition to the SCX 6.
EPC delivery of loading facility for liquid chemicals to river rankers through loading arms DN200. Laoding arms are hydraulically actuated and equipped by ERS (Emergency Rrelease System).
提供了完整的易燃品铁路接卸终端系统(EPC)。.
提供了生物油品的调合和添加剂自动加注系统。
重建CEPRO 3个的油库自动化管理系统。
为德国汉堡油库提供了油品接卸自动化管理系统和发油岛成套设备,以及 EVA5 添加剂自动加注系统。
提供了油库的电子设备部分。
提供俄斯特拉发水处理厂的 TSX 24.3。
生产H-LBUI, 罐车接卸的一部分。
设计了保加利亚4个战略储备库。
提供TSCL 422并为客户定制TSMGX stations。
完成部队油库的重建。
重建Čepro油库接卸终端。
提供了Roudnice油库的自动化控制系统。
提供生物油品技术和设备。
鲁古伊油库EPC总承包项目。
A recuperation unit deployment.
完成CEPRO 100 000m3 油库的交钥匙工程。3(EPC delivery)
完成Roudnice油库自动化控制系统。
设计安装完成付油系统,包括着色和添加的技术。
交付为了用于军事喷气机燃料而生产的添加剂设备EVA5。
交付EVA5添加剂设备
设计安装完成了铁路的接付油自控系统 。
完成PTI公司在LITVA的TAMAS® 和SCADA SCX 的油库一体化自动控制系统。
区域性控制中心,可视化的SAIA控制站。
设计完成监测煤储量的控制系统。
设计安装完成发轻燃油到铁路的槽车,在此过程中,并均匀的加入添加剂。
设计安装完成5个站点的区域性供水控制系统。
设计安装完成了70个供水站点的自动控制系统。
设计安装完成了复杂的多瑙河河上油库,包括技术和自控。这些油料通过驳船再用公路和铁路转到各个地方。
完成工程项目的设计、装配和油气回收的自动化控制系统,以及不同的油料产品终端。
完成工程项目的设计、装配、测量、调节控制及接卸的自动化控制。
设计安装完成水处理厂的自动控制系统。Prerov – Troubky
完成项目的设计和油库的技术,及相应的自控系统。
设计完成工程项目并提供了接付油的技术。
参与乙烯项目的仪表控制单元。
设计安装完成胺的终端供应技术。
完成45个供水站的区域性控制系统。
完成80个供水厂的区域控制系统
完成 控制系统、测量和调节控制、水处理厂的配线 — Hrdiborice ,区域性供水控制系统。
完成油库的项目工程设计、安装和重建。
设计安装完成装配、测量、调节控制及接卸的自动化控制系统。
分三个步骤,重建了热电厂的单个锅炉的控制和配发系统,包括监测和评估厂内的能源配给。
完成装配、测量、调节及电压控制和炼焦厂的备用电池装配。
灰分管道的控制系统
设计安装完成水厂的区域性控制系统。
设计安装完成发电厂的监测发热、电力消耗自控系统。
设计安装完成54个供水中心的区域控制系统。
设计安装完成52个供水中心的区域控制系统。