Oil & Gas
BUILDING OF JET FUEL STORAGE IN LIELVARDE AIRFIELD IN LATVIA / 2014 - 2015
The contract for NSPA: Construction of new terminal JET-A1 with 2 vertical storage tanks, one place for unloading tank trucks, two loading SKIDS (islands) for loading tank truck, including additivation system, control system and instrumentation and TAMAS system.
Detail Design Documentation Package for newly built Petrochina terminal in Dongguan. Includes technology for tanktruck loading and control system for the entire tankfarm with planned capacity 400.000 m3. Dongguan is first Chinese terminal designed according to European conventions.
Additivation systems for dispensing into tank trucks at the terminal in INA Rijeka and Solin. The first use of the new blending unit Accuplus - 15pcs.
Four old flowmeters were replaced by SMITH PRIME devices.
Delivery of 6 SKIDs for rail terminal, switchboard for automated control system and instrumentation. Software:TAMAS system. There were needed major adjustments for dispensing into rail tankers. Product is a fuel extracted from shale.
Completely new terminal in Loukov. Building part - new bath, roofing bath, new substation. Technological part - new pumps, piping, low and high pressure valves. Electrical Engineering - new & reconnected drive units . Automation & instrumentation - a new PLC, field instrumentation.
Following the delivery of METROSTAV: full supply for low voltage switchgear for unit PS 262 - construction electrical part. Delivery of the 10-fields switchboard.
Railway terminal: Design, production and recovery of 11 measuring skids, TAMAS system for railway terminal (loading and unloading), mass measurement by Micromotions, Acculoads, integration to the LNHB system.
Delivery of 26 measuring skids with Micromotion for the refinery in Erbil / Kurdistan. Corioli prover with triple mass flow measurement, FloBoss control.
Construction of warehouse storage capacity, supply of instrumentation for a new unit No 237.
Extensive modernization of fuel storage at two locations - Vrbice I and Vrbice II, it affects about 20 objects; realisation: 2010-2012. Construction work and new automated control system for the new technology, a new system of measurement and control + camera security system.
Design, production and recovery of 16 measuring skids and the system TAMAS for AC terminal. Skids based on volumetric measurement (PRIMA4) ACL. Colouring of the product by using devices EVA6. TAMAS system for unloading.
Reconstruction of storage: Installation of two tanks (250 m3), installation of metering skids, build of new loading and unloading islands.
Ostrava Airport - reconstruction of facilities. New wiring - cables, excavations - 22kV and 6kV for the airport area. Public lighting, gas connection. New (building + technology) high voltage substation HTS-2. New high voltage 22 and 6kV switchgear in three substations, new high voltage transformer, reconstruction of low voltage in substations.
Delivery of technology for storage, loading and unloading of products at the Airport of Pardubice, CZ. Delivery of automated control system and instrumentation - switchboard, field instrumentation and TAMAS system. Funded by the EU.
Prague Airport - measurement of density and pressure. Delivery of MicroMotions for measuring of density in the tank of fuel. Delivery of pressure gauges.
Design and fabrication of filtration, measuring and regulating skids based on mass measurements at the beginning and at the end of the pipeline from the company STAROIL. Our first application of crude oil. Development and production of stationary Corioli Prover. The first use of the crude oil analyzer and auto sampler.
The contract for NATO: reconstruction of the airport in Sliač. The construction of new loading from rail tankers including 2 km long pipeline to the reservoirs (3x250m3) and output into tank trucks.
Delivery of metering skids, grounding equipment and TAMAS control system for truck loading terminal for gasoline and shell oil products. At the moment, the project is extended by railway terminal.
Engineering, fabrication, installation supervision and start-up of metering skids and control system. The facility is owned by Neste Oil, a Finnish oil refining and marketing company.
Fabrication of 300 m3/h vapor recovery unit for truck loading terminal Komárom, EPC Jordan Technologies.
Fabrication of 300 m3/h vapor recovery unit for truck loading terminal Bratislava, EPC Jordan Technologies.
Engineering, fabrication, installation and start-up of 400 m3/h vapour recovery unit for Yiwan - Shenzhen tankfarm.
Engineering, fabrication, installation and start-up of 400 m3/h vapour recovery unit for Zhishan tankfarm.
Delivery of containerized coloring system, system for measuring of loaded and unloaded products, and TAMAS supervising system.
Delivery of complete truck loading installation with 4 loading islands, 16 metering systems for light fuels, top and bottom loading, additive dosing system for Lukoil and Shell additives, blending of biofuels and coloring of diesel fuels. Installation is completely automated by TAMAS control system.
Delivery and integration of vapour recovery unit with 150 m3/h capacity.
EPC delivery of loading facility for liquid chemicals to river rankers through loading arms DN200. Laoding arms are hydraulically actuated and equipped by ERS (Emergency Rrelease System).
Complex supply of the engineering, technology and automation for railway transloading terminal for flamable products liquids.
Delivery of the trucks fuel loading technology including additives and biofuel blending.
Complex modernisation of the control system on tankfarms (EPC delivery).
Delivery of additivation system EVA5 for truck fillings.
Delivery of electrical equipment for the fuel storage tanks.
Modification of tank truck loading terminal for loading of H-LBI (white spirit).
Delivery of blending unit EVA 6, SKID service and bottom loading trucks technology.
BASIC DESIGN for 4 strategic fuel storages and terminals of the State fuel reserves of Bulgaria.
Fuel tanks.
Expansion of 11 tankfarms and tank truck loading terminals for biofuels blending. EPC delivery.
Fuel loading terminal refurbishing for Čepro.
Delivery of automation control system and construction of storage tanks in Roudnice.
Expansion of tankfarm and tank truck loading terminal for biofuels blending. EPC delivery.
Basic and Detail Design, engineering, EPC delivery on turn-key basis. The terminal has 4 loading bays for TOP and BOTTOM loading with capacity of 60 tank trucks loading per day.
A recuperation unit deployment.
Refurbishment of fuel tanks and related work.
Construction of new tankfarm for petroleum products with capacity 100 000m3 (EPC delivery)
Implementation of automation system for the Roudnice fuel storage.
Design, delivery and engineering of additive dosing system EVA6, additive pump station and loading arms on taktruck terminal.
Fuel dispensing terminal, including painting and additive feeding technologies. Major delivery.
Delivery of additive dosing system EVA5 for jet fuel for military purposes.
Complex delivery of warehouse and filling tray technology for a fuel terminal (railway loading station, tanks, filling trays, additive feeding technologies).
Project and delivery of a light fuel additive feeding unit.
Project and delivery of MaR (Measurement and Regulation) for two new oil tanks.
Delivery of additive dosing system EVA5.
Reconstruction of a fuel warehouse and dispensing station.
A terminal for fuel filling into tank trucks. Mayor delivery of a road fuel terminal.
TAMAS® and automation system SCADA SCX for fuel terminal.
Delivery of MaR (Measurement and Regulation) and computer-assisted control system for a construction of new fuel terminal tanks.
Delivery of facilities, technology, MaR (Measurement and Regulation) and computer-assisted control system of a fuel terminal.
Delivery of facilities, technology, MaR (Measurement and Regulation) and computer-assisted control system of fuel terminal.
Project, complex delivery of technology and control of a river fuel warehouse on the Danube with loading into railway wagon tanks and truck tanks.
Light fuel oil and oil filling into railway tanks including feeding of additives.
Delivery of project, wiring, MaR (Measurement and Regulation) and computer-assisted control system of a recovery unit and fuel product line terminal.
Engineering, project and delivery of wiring, MaR (Measurement and Regulation) and computer-assisted control system of fuel terminal.
Project, complete delivery of warehouse technology and control.
Engineering, project and delivery of a fuel terminal technology and control.
Engineering, project and delivery of fuel terminal technology at a locomotive depot.
Participation in a project involving re-instrumentation of an ethylene unit.
Project and delivery of electric equipment and computer-assisted control system of a petrol vapor recovery line for PARAMO Pardubice a.s. railway terminal.
Delivery of recovery, technology and control units for new filling trays.
Delivery of a project, wiring, technology and control of reconstructed and new filling trays of a fuel terminal (railway loading station, tank station, filling trays, vapour return line).
Delivery of complex technology and control of light fuel terminal.
Engineering, project and delivery of a fuel warehouse reconstruction (oil management).
Delivery of Wiring, MaR (Measurement and Regulation) and computer-assisted control system.
Delivery of Wiring, MaR (Measurement and Regulation) and computer-assisted control system of a fuel terminal.
Project and delivery of fuel terminal technology (railway loading station, tank station, filling trays, vapour return line).
Engineering, project and delivery of fuel terminal technology (railway loading station, tank station, filling trays, vapor return line) in Prerov.
Technical supervision over an installation of a SCADA system for a construction of a product line at Kandla-Bhatinda, India.
